Programmable EEPROM signature
Characteristics
- Compatible with industry standard SFP cages+Switches
- EEPROM signature can be customized
- SFP+cable assemblies are hot swappable
- Low power consumption
Application
- 10G Ethernet
- InfiniBand, Fiber Channel 4G/8G/10G
- Sonet Multiplatform support
- High Performance Computing Clusters
- High End Servers
- Metro Network Switch/Cross Connect
Fiberon’s SFP+cable assemblies are designed to meet data center,networking and high performance computing application needs for a high density cabling interconnect system capable of 10Gb/s per channel transmission rates. They are designed to be fully compatible in form factor and optical/electrical connections according to meet the requirements of Small Form Factor industry standards.
SFP+Connectors meet the harshest external operating conditions including temperature, humidity and EMI interference. Final test and quality systems assure high quality cable assemblies conforming to the high-speed electrical performance requirements in industry specifications
Standard Copper SFP+assemblies are offered in different wire gauges (AWG) depending on length.
| Wire Gauge | Cable Diameter | Mini Outer Radius |
Cable Length |
|---|---|---|---|
| (mm) | (mm) | (m) | |
| 30AWG | 4.5 | 22.5 | 1 ~ 3 |
| 28AWG | 4.7 | 23.5 | 4 ~ 5 |
| 26AWG | 5.0 | 25 | 5 ~ 6 |
| 24AWG | 6.0 | 30 | 6 ~ 15 |
Standard Copper SFP+assemblies Overview
| Test Type | Test Item | Target | Reference |
|---|---|---|---|
| Electrical Characteristics |
Differential Mode RL (SDDII) | 0.01 Measurements units: dB | SFF 8431 |
| Common mode return loss (SCCII) | 0.01 Measurements units: dB | SFF 8431 | |
| NEXT | / | ||
| Cable assembly Impedence | 100+/ -100hm Rise time of 30 ps (20 %- 80 %) |
(20%~80 %) | |
| Insertion Loss Deviation | -1dB≤ILD≤1dB 300KHz≤f≤6GHz |
/ | |
| Environmental Characteristics |
Operating Temperature | -40~85°C | Cable operating temp. range |
| Thermal Shock | Electrical performance meet the specification requirement |
EIA-364-32D. Method A. TC-1. -55 10 85C,100 cycles, 15 min, dwells |
|
| Cyclic Temp. & Humidity | Electrical performance meet the specification requirement |
EIA-364-31 Method III, Test Cond A | |
| Salt spray | 48 hours salt spraying after shell corrosive area less than 5% | EIA-364-26 | |
| Temperature Life | Performance meets the specification requirement | EIA-364-17B w/ RH, Damp heat 85C at 85% RH for 500 hours |
|
| Mechanical Characteristics |
MechanicaI Vibration | Performance meets the specification requirement | EIA-364-28E.11 TC-VII, Test Cond. D 15minutes in X,Y,Z axis. |
| Cable Plug Retention in Cage | 90N Min. | No functional damage to cable plug below 90N. Per SFF-8432 Rev 5.0 | |
| Cable Retention in Plug | 90N Min. | EIA-455-6B | |
| Mechanical Shock | Performance meets the specification requirement | Clamp and Shock per EIA-364-27B, TC-G, 3times in 6directions, 100g, 6ms |
|
| Cable plug Insertion | 18N(Max.) | SFF-8432 Rev 5.0 | |
| Cable plug extraction | 12.5N(Max.) | SFF-8432 Rev 5.0 | |
| Durability | 50 Time. No evidence of physical damage | EIA-364-09; perform plug&unplug cycles Plug and Receptacle mate rate: 250times/hour |
Specifications may change without notice. Display Product Photos Shown are samples for viewing, not actual products. Colours and styles may vary.
Contact us
Hybrid Copper QSFP+ to 4X SFP+
Rack-to-Rack applications
High Speed QSFP+ Copper Cable
Economic solution for within rack, or rack-to-rack applications